PEEK+PTFE perfluorence Tribocompound CoPEEK+PTFEcg

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ISO1183	1.34 g/cm³
melt mass-flow rate		ISO1133	37 g/10min

Mechanical properties	Test Condition	Test Method	Test Result
Bending Strain		ISO178	6.4 %
Tensile modulus		ISO527-2/1A/1	3200 MPa
Tensile stress		ISO527-2/1A/50	78.0 MPa
Tensile strain	Yield	ISO527-2/1A/50	5.0 %
Tensile strain	Tensile strain	Break	ISO527-2/1A/50	9.0 %
Flexural modulus		ISO178	3150 MPa
Bending stress		ISO178	123 MPa
		ISO7148	0.18
WearCoefficient		ISO7148	2.1E-06 mm³/(N·m

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO179/1eA	19 kJ/m²
Impact strength of simply supported beam without notch		ISO179/1eU	无断裂

Electrical performance	Test Condition	Test Method	Test Result
dielectric constant		IEC60250	3.10
Dissipation Factor		IEC60250	1E-03
Dissipation Factor	Dissipation Factor		IEC60250	0.010
dielectric constant		IEC60250	3.10

Thermal performance	Test Condition	Test Method	Test Result
Glass Transition Temperature		ISO11357-2	152 °C
melting temperature		ISO11357-3	325 °C
melting temperature	melting temperature		ISO11357-3	340 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top