Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
density | | ASTM D792 | 1.18to1.19 g/cm³ |
Water absorption rate | | ASTM D570 | 1.1to1.5 % |
ash content | | USP281 | 0.020to0.060 % |
hardness | Test Condition | Test Method | Test Result |
---|
Rockwell hardness | M-Scale | | 73to76 |
Shore hardness | | | 83to86 |
Impact resistance | Test Condition | Test Method | Test Result |
---|
Impact strength of cantilever beam gap | | ASTM D256 | 20to30 J/m |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
Tensile modulus | | ASTM D638 | 2000to3000 MPa |
tensile strength | | ASTM D638 | 50.0to65.0 MPa |
elongation | Break | ASTM D638 | 10to25 % |
Flexural modulus | | ASTM D790 | 2200to3200 MPa |
bending strength | | ASTM D790 | 75.0to110 MPa |
Thermal performance | Test Condition | Test Method | Test Result |
---|
Heat distortion temperature | | ASTM D648 | 45.0to50.0 °C |
Heat distortion temperature | | ASTM D648 | 45.0to50.0 °C |
Glass Transition Temperature | | DMA | 52.0to54.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.