PLA Kareline® PLMS7525
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 1.31 g/cm³ | |
| melt mass-flow rate | ISO1133 | 44 g/10min | |
| Melt volume flow rate | ISO1133 | 38.1 cm³/10min | |
| Shrinkage rate | 0.40 % | ||
| Water absorption rate | 0.70 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ISO2039-2 | 121 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Bending stress | ISO178 | 110 MPa | |
| Bending Strain | ISO178 | 2.5 % | |
| Tensile stress | ISO527-2 | 70.3 MPa | |
| Tensile strain | Break | ISO527-2 | 2.5 % |
| Flexural modulus | ISO178 | 5100 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO179 | 15 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Continuous use temperature | -25.0到85.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top