PBT 1164G-30 TORAY SHENZHEN

Form：Granules | Grade：Enhanced level

Properties:

Flame retardantFiller: Glass fiber reinf30%Filler by weight

Typical Applications:

Automotive Applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive Applications
Properties:	Flame retardant \| Filler: Glass fiber reinf \| 30% \| Filler by weight

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179	60	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.8mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength	23°C	ISO 178	210	Mpa
tensile strength	Yield,23°C	ISO 527-2	140	Mpa
Tensile strain	Break,23°C	ISO 527-2	2.4	%
Tensile modulus	23°C	ISO 527-2	11700	Mpa
Friction coefficient			0.20
Friction coefficient vs. Metal		SuzukiMethod	0.15
Bending modulus	23°C	ISO 178	11000	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	207	°C
Hot deformation temperature	Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	220	°C
Linear coefficient of thermal expansion	MD：-30to100°C	ISO 11359-2	4E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	MD:3.00mm4	Internal Method	0.40	%
Shrinkage rate	Shrinkage rate	TD:3.00mm2	Internal Method	1.2	%
Water absorption rate	23°C,24hr	ISO 62	0.070	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	23°C,1MHz	IEC 60250	0.020
Arc resistance		IEC 60950	134	sec
Dielectric strength		IEC 60243-1	14	KV/mm
Dielectric constant	23°C,50Hz	IEC 60250	4.00
Dissipation factor	23°C,50Hz	IEC 60250	1E-03
Volume resistivity		IEC 60093	1.1E+17	ohms·cm
Compared to the anti leakage trace index	CTI	UL 746	PLC 2
Dielectric constant	23°C,1kHz	IEC 60250	3.80
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	M-Sale,23°C	ISO 2039-2	85
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
BarFlowLength	250°C,1.00mm	Internal Method	145	mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top