ABS Generic ABS+Nylon - Glass Fiber

Properties:
Fillers
glass fiber reinforced materials
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTM D792	1.10to1.53 g/cm³
density	density		ISO 1183	1.12to1.20 g/cm³
Shrinkage rate		ASTM D955	0.30to0.50 %
Shrinkage rate	Shrinkage rate		ISO 294-4	0.25to0.80 %
Water absorption rate		ASTM D570	0.70 %

hardness	Test Condition	Test Method	Test Result
Rockwell hardness		ASTM D785	116to118

Impact resistance	Test Method	Test Result
Impact strength of simply supported beam without notch	ISO 179	29to50 kJ/m²
Impact strength of cantilever beam gap	ASTM D256	80to160 J/m
Charpy Notched Impact Strength	ISO 179	7.9to12 kJ/m²

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ASTM D638	51.0to124 MPa
elongation		ASTM D638	3.8to4.0 %
Tensile modulus		ISO 527-2	2500to5400 MPa
tensile strength		ISO 527-2	43.0to56.4 MPa
Flexural modulus		ASTM D790	2140to8320 MPa
Flexural modulus	Flexural modulus		ISO 178	2550to6500 MPa
bending strength		ASTM D790	75.8to207 MPa
bending strength	bending strength		ISO 178	60.0to167 MPa

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	107to202 °C
vicat		ISO 306	108to182 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top