AS(SAN) RAMSHINE PW311G4 POLYRAM ISRAEL
0
- Properties:Fillerglass fiber reinforced material20%filler by weight
Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|---|---|---|
density | ISO 1183 | 1.20 g/cm³ | |
melt mass-flow rate | ASTM D1238 | 8.0 g/10min | |
ISO 1133 | 8.0 g/10min | ||
Shrinkage rate | ASTM D955 | 0.20 % | |
ISO 2577 | 0.20 % | ||
Water absorption rate | Saturation | ASTM D570 | 0.10 % |
ISO 62 | 0.10 % | ||
density | ASTM D792 | 1.20 g/cm³ |
flammability | Test Condition | Test Method | Test Result |
---|---|---|---|
UL flame retardant rating | UL 94 | HB |
Mechanical properties | Test Condition | Test Method | Test Result |
---|---|---|---|
Tensile strain | Break | ISO 527-2 | 2.0 % |
Flexural modulus | ASTM D790 | 5200 MPa | |
ISO 178 | 5200 MPa | ||
bending strength | ASTM D790 | 200 MPa | |
ISO 178 | 200 MPa | ||
Tensile modulus | ISO 527-2 | 7000 MPa | |
tensile strength | Yield | ASTM D638 | 100 MPa |
Yield | ISO 527-2 | 100 MPa | |
elongation | Break | ASTM D638 | 2.0 % |
Tensile modulus | ASTM D638 | 7000 MPa |
Impact resistance | Test Condition | Test Method | Test Result |
---|---|---|---|
Impact strength of cantilever beam gap | ASTM D256 | 60 J/m | |
ISO 180 | 8.0 kJ/m² |
Electrical performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Surface Resistivity | IEC 60093 | 1E+14 ohms | |
Volume resistivity | IEC 60093 | 1E+18 ohms·cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top