PPS LATILUB 80-10T G/40
30
- Properties:Filler: Glass fiber reinf40% filler by weight
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ISO294-4 | 0.40to0.60 % | |
| ISO294-4 | 0.10to0.25 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO179/1eU | 45 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO527-2/1 | 14500 Mpa | |
| Tensile stress | ISO527-2/5 | 160 Mpa | |
| Tensile strain | ISO527-2/5 | 1.5 % | |
| ASTMD1894 | 0.23 | ||
| ASTMD1894 | 0.26 | ||
| Wear factor | ASTMD3702 | 1E-06 mm³/Nm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO75-2/B | 280 °C | ||
| ISO75-2/A | 265 °C | ||
| vicat | ISO306/B50 | 260 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top