
POM 525GR DUPONT USA
301
Form:Granules | Grade:Injection grade
Properties:
high strengthHigh rigidityGlass fiber reinforced
Typical Applications:
Household appliancesFitness equipment
Product Description
Certificates(1)
Datasheet
Product Description
| Typical Applications: | Household appliances | Fitness equipment |
| Properties: | high strength | High rigidity | Glass fiber reinforced |
Certificates

Technical Data Sheet
| other | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| remarks | 注塑级 | |||
| characteristic | 中粘性。25%玻纤增强级有特高刚性及强度。 | |||
| purpose | 需要较高刚性的机械零件 | |||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Ezo notch impact test | 23℃ | ISO 180/1A | 9 | kJ/m² |
| Yield point strain | 5mm/min 23℃ | ISO 527-1/2 | 3 | % |
| Tensile coefficient | 1mm/min 23℃ | ISO 527-1/2 | 9500 | Mpa |
| Bending modulus | ISO 178 | 8000 | Mpa | |
| Charpy notch impact test | 23℃ | 179/1eA | 8 | kJ/m² |
| Tensile stress | 5mm/min 23℃,Yield | ISO 527-1/2 | 140 | Mpa |
| Bending modulus | ASTM D790/ISO 178 | 8000(MPa) | kg/cm²(MPa)[Lb/in²] | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 0.45MPa | ISO 75-1/-2 | 176 | °C |
| Melting temperature | ISO 3146C | 178 | °C | |
| Hot deformation temperature | 1.8MPa | ISO 75-1/-2 | 172 | °C |
| Melting temperature | 178 | ℃(℉) | ||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | Equilibrium于50%相对湿度 | ISO 62 | 1.3 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.