
PC/PBT 553-1001 SABIC INNOVATIVE SHANGHAI
212
Form:Granules | Grade:Injection grade
Properties:
Flame retardantGlass fiber reinforced
Typical Applications:
Electrical fieldElectronic fieldHousehold appliancesHousehold appliancesAutomotive sector
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electrical field | Electronic field | Household appliances | Household appliances | Automotive sector |
| Properties: | Flame retardant | Glass fiber reinforced |
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | 0.9mm | UL 94 | V-0 | |
| 2.3mm | UL 94 | 5VA | ||
| Extreme Oxygen Index | ASTM D2863 | 37 | % | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | Break | ASTM D638 | 110 | Mpa |
| Bending modulus | 50.0mmSpan | ASTM D790 | 9400 | Mpa |
| bending strength | Break,50.0mmSpan | ASTM D790 | 179 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 0.45MPa,Unannealed,6.40mm | ASTM D648 | 204 | °C |
| 1.8MPa,Unannealed,6.40mm | ASTM D648 | 160 | °C | |
| Linear coefficient of thermal expansion | MD:-40to40°C | ASTME831 | 2.2E-05 | cm/cm/°C |
| MD:60to138°C | ASTME831 | 2.2E-05 | cm/cm/°C | |
| RTI Elec | UL 746 | 125 | °C | |
| RTI Imp | UL 746 | 110 | °C | |
| RTI Str | UL 746 | 125 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | TD:--3 | Internal Method | 0.40-0.60 | % |
| TD:--4 | Internal Method | 0.60-0.90 | % | |
| Water absorption rate | 24hr | ASTM D570 | 0.070 | % |
| Outdoor applicability | UL 746C | f1 | ||
| Specific volume | ASTM D792 | 0.640 | cm³/g | |
| Shrinkage rate | MD:--2 | Internal Method | 0.50-0.80 | % |
| MD:--3 | Internal Method | 0.30-0.50 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | ASTM D257 | 4.3E+16 | ohms·cm | |
| Dielectric strength | 1.60mm,in Oil | ASTM D149 | 26 | KV/mm |
| 3.20mm,inAir | ASTM D149 | 19 | KV/mm | |
| Dielectric constant | 100Hz | ASTM D150 | 3.80 | |
| 1MHz | ASTM D150 | 3.70 | ||
| Dissipation factor | 100Hz | ASTM D150 | 2E-03 | |
| 1MHz | ASTM D150 | 0.020 | ||
| Arc resistance | ASTM D495 | PLC6 | ||
| Compared to the anti leakage trace index | CTI | UL 746 | PLC 3 | |
| High arc combustion index | HAI | UL 746 | PLC 3 | |
| High voltage arc tracing rate | HVTR | UL 746 | PLC 3 | |
| Hot wire ignition | HWI | UL 746 | PLC 1 | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | R-Scale | ASTM D785 | 118 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.