PP 1001-PPG18
0
- Properties:Good dimensional stabilityhigh fluiditygood toughnesslow injection temperature (170 ℃ -185 ℃)low injection pressure (10-30Mpa)
- Usages:Vacuum cleanerelectric rice cookertoastercar refrigeratorbathtubelectric fanelectrical handlebutton and other high-temperature resistant small home appliance shells
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | 1.3-1.4 % | ||
| density | 1.05 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Elongation | 53.3 % | ||
| Charpy Notched Impact Strength | 5.93 KJ/m | ||
| bending strength | 48.8 MPa | ||
| tensile strength | 27.5 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 118.0 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top