
PBT 551-GT30F BRICI BEIJING
24
Form:Granules
Properties:
Flame retardantLow warpageHigh rigidityHigh glossGlass fiber reinforcedDielectric performanceThis product has low warpHigh rigidityExcellent dielectric propGood surface gloss and otThis product has low warpHigh rigidityExcellent dielectric propGood surface gloss and ot
Typical Applications:
Electrical fieldElectronic fieldLarge electronics suitable for high electrical perHousing of electrical productsLarge electronics suitable for high electrical perHousing of electrical products
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electrical field | Electronic field | Large electronics suitable for high electrical per | Housing of electrical products | Large electronics suitable for high electrical per | Housing of electrical products |
| Properties: | Flame retardant | Low warpage | High rigidity | High gloss | Glass fiber reinforced | Dielectric performance | This product has low warp | High rigidity | Excellent dielectric prop | Good surface gloss and ot | This product has low warp | High rigidity | Excellent dielectric prop | Good surface gloss and ot |
Certificates
No Data...
Technical Data Sheet
| processability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.5-0.9 | % | |
| Spiral flow length | -- | CM | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | ISO 527 | 110 | Mpa | |
| elongation | Break | ISO 527 | 3.9 | % |
| bending strength | ISO 178 | 180 | Mpa | |
| Bending modulus | ISO 178 | 6.9*103 | Mpa | |
| Charpy Notched Impact Strength | Notched | ISO 179(leA) | 8 | kJ/m² |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.82MPa | ISO 75f | 190 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ISO 1183 | 1.61 | g/cm³ | |
| Water absorption rate | 23℃,24hr | ISO 62 | 0.09 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric constant | 106HZ | IEC 60250 | 3.4 | |
| Dielectric loss | 106HZ,Tangent | IEC 60250 | 1.7*10-2 | |
| Volume resistivity | IEC 60093 | 1*1014 | Ω。m | |
| Dielectric strength | IEC 60243 | 32 | KV/m | |
| Arc resistance | IEC 61621 | -- | sec | |
| ash content | 30 | % | ||
| flame retardant performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL 94 | V-0(0.8mm) |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.