PPS+PBT

PPS+PBT VAMPSON B 3010 VAMP TECH ITALY

Properties:
Filler glass fiber reinforced material 30% filler by weight
Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ISO 180/A	5.0 kJ/m²
Suspended wall beam without notch impact strength		ISO 180	25 kJ/m²

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ASTM D638	12000 MPa
elongation	Break	ASTM D638	1.4 %
tensile strength	Yield	ASTM D638	130 MPa

thermal performance	Test Condition	Test Method	Test Result
RTI		UL 746	140 °C
RTI Imp		UL 746	140 °C
RTI Elec		UL 746	140 °C
Vicat softening temperature		ASTM D15252	245 °C
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648A	255 °C

Physical properties	Test Condition	Test Method	Test Result
Shrinkage rate	TD	ASTM D955	0.50 %
Shrinkage rate	Shrinkage rate	MD	ASTM D955	0.30 %
density		ASTM D792	1.57 g/cm³

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top