PA66 A30SFN31 LANXESS GERMANY

Form：Granules | Grade：Flame retardant grade

Properties:

Flame retardantHigh mobility

Typical Applications:

Electronic fieldElectrical fieldAutomotive sector

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Electronic field \| Electrical field \| Automotive sector
Properties:	Flame retardant \| High mobility

Certificates

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-30℃-30°C	ISO 179/1eU	50	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23℃23°C	ISO 179/1eU	60	kJ/m²
Impact strength of cantilever beam gap	23℃23℃	ISO 180-1A	< 10	kJ/m²
Suspended wall beam without notch impact strength	-30℃-30°C	ISO 180/1U	55	kJ/m²
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	23℃23°C	ISO 180/1U	55	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	23℃23℃	ISO 527-1-2	3800	Mpa
tensile strength	Yield，23℃Yield，23℃	ISO 527-2/50	85	Mpa
Tensile strain	Yield，23℃Yield，23℃	ISO 527-2/50	4.1	%
Bending modulus	23℃23℃4	ISO 178-A	3700	Mpa
bending strength	3.50% Strain3.5% Strain	ISO 178-A	120	Mpa
bending strength	bending strength	23℃23°C	ISO 178	125	Mpa
Bending strain	23°C		5.8	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature	B120B120	ISO 306/B120	230	°C
Melting temperature		ISO 11357-3	265	°C
Linear coefficient of thermal expansion	TD：23~55℃TD：23 to 55℃	ISO 11359-2	0.000070	1/℃
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：23~55℃MD：23 to 55℃	ISO 11359-2	0.000080	1/℃
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density	23°C	ISO 1183	1.17	g/cm³
Shrinkage rate	TD：270℃，2.0 mmAcross Flow : 518°F, 0.0787 in 22	ISO 294-4	1.1	%
	Shrinkage rate	TD：120℃，2.0 mm，2 hrsAcross Flow : 120°C, 2 hr, 2.00 mm 33	ISO 294-4	0.1	%
		Shrinkage rate	MD：270℃，2.0 mmFlow : 518°F, 0.0787 in 22	ISO 294-4	1.1	%
		Shrinkage rate	Shrinkage rate	MD：120℃，2.0 mm，2 hrsFlow : 120°C, 2 hr, 2.00 mm 33	ISO 294-4	0.1	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	1000000000000000	ohms
Volume resistivity	23℃23℃	IEC 60093	100000000000000	ohms·cm
Dielectric strength	23 ℃，1 mm23℃，1.00 mm	IEC 60243-1	30	KV/mm
Relative permittivity	23℃，100 Hz23°C, 100 Hz	IEC 60250	4
Relative permittivity	Relative permittivity	23℃，1 MHz23°C, 1 MHz	IEC 60250	4
Dissipation factor	23℃，100 Hz23°C, 100 Hz	IEC 60250	0.012
Dissipation factor	Dissipation factor	23℃，1 MHz23°C, 1 MHz	IEC 60250	0.019
Compared to the anti leakage trace index	Solution ASolution A	IEC 60112	PLC 0
flame retardant performance	Test Condition	Test Method	Test Result	Test Unit
0.40 mm??0.40 mm	0.40mm	UL 94	V-0
Glow wire combustion index (GWFI)	0.40 mm0.40 mm	IEC 60695-2-12	960	°C
Ignition temperature of heating wire	0.4 mm0.40 mm	IEC 60695-2-13	775	°C
Ultimate Oxygen Index		ISO 4589-2	34	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top