POM/PTFE LNP™ LUBRICOMP™ KL004A WHNAT SABIC INNOVATIVE US
31
- Properties:wear resistant
- Usages:Electrical appliancesElectronic and Electrical ApplicationsPlastic bagIndustrial applications
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTMD955 | 2.0to2.2 % | |
| ASTMD955 | 2.0to2.2 % | ||
| ISO294-4 | 2.0to2.2 % | ||
| ISO294-4 | 2.0to2.2 % | ||
| Water absorption rate | ASTMD570 | 0.23 % | |
| ISO62 | 0.37 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | ASTMD638 | 11 % | |
| Tensile strain | ISO527-2 | 9.4 % | |
| Flexural modulus | ASTMD790 | 2620 Mpa | |
| ISO178 | 2900 Mpa | ||
| bending strength | ASTMD790 | 86.0 Mpa | |
| Bending stress | ISO178 | 86.5 Mpa | |
| ASTMD3702Modified | 0.23 | ||
| ASTMD3702Modified | 0.091 | ||
| Wear factor - Washer | ASTMD3702Modified | 12.0 10^-10in^5-min/ft-lb-hr | |
| Tensile modulus | ASTMD638 | 2550 Mpa | |
| ISO527-2/1 | 2700 Mpa | ||
| tensile strength | ASTMD638 | 56.1 Mpa | |
| Tensile stress | ISO527-2 | 50.6 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam gap impact strength 3 | ISO180/1A | 4.5 kJ/m² | |
| UnnotchedIzodImpactStrength3 | ISO180/1U | 39 kJ/m² | |
| Dart impact equipped with measuring instruments | ASTMD3763 | 7.20 J | |
| Multi axis Instrumented Impact Energy | ISO6603-2 | 0.960 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 95.0 °C | ||
| Hot deformation temperature 4 | ISO75-2/Af | 98.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top