PEEK LUVOCOM® 1105-8487 LEHVOSS Group

Properties:
Fillers
aromatic polyamide fibers
Usages:
Aerospace applications
textile applications
medical
nursing supplies
gears
bushings
automotive applications
bearings
engineering accessories
pumps
Compare

Technical Data Sheet

physical property	Test Method	Test Result
density	ISO 1183	1.32 g/cm³
Shrinkage rate	DIN 16901	0.50to1.1 %
Water absorption rate		<0.10 %

Mechanical properties	Test Condition	Test Method	Test Result
Tensile strain	Yield	ISO 527-2	4.0 %
Flexural modulus		ISO 178	4200 MPa
bending strength		ISO 178	130 MPa
Bending Strain		ISO 178	5.2 %
Tensile modulus		ISO 527-2	5000 MPa
tensile strength	Break	ISO 527-2	90.0 MPa

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO 179/1eA	6.0 kJ/m²
Impact strength of simply supported beam without notch		ISO 179/1eU	30 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
insulation resistance		IEC 60167	>1.0E+12 ohms

Thermal performance	Test Condition	Test Method	Test Result
Continuous use temperature		UL 746B	250 °C
maximum service temperature			260 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top