LDPE ASPC LF2119
236
- Usages:film
Compare
View PricesTechnical Data Sheet
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| characteristic | 其它 薄膜 通用 | ||
| Color | 透明乳白 | ||
| purpose | 一般通用薄膜 |
| processability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| process temperature | 160 °C | ||
| 180 °C | |||
| 190 °C | |||
| screw speed | 1500 rpm | ||
| Temperature | 75 °C | ||
| Melt Temperature | 210 °C | ||
| pressure | 200 Mpa | ||
| 190 Mpa |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation at break | ASTM D638/ISO 527 | 35 % | |
| Tensile modulus | ASTM D638/ISO 527 | 200 kg/cm²(MPa)[Lb/in²] | |
| tensile strength | ASTM D638/ISO 527 | 13 kg/cm²(MPa)[Lb/in²] | |
| elongation | ASTM D638/ISO 527 | 190 % | |
| Rockwell hardness | ASTM D785 | 60 | |
| Flexural modulus | ASTM D790/ISO 178 | 200 kg/cm²(MPa)[Lb/in²] | |
| elongation at break | ASTM D638/ISO 527 | 500 % |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 0.921 | |
| Shrinkage rate | ASTM D955 | 3 % | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 1.9 g/10min | |
| ASTM D1238/ISO 1133 | 3 g/10min | ||
| Water absorption rate | ASTM D570/ISO 62 | 0.002 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648/ISO 75 | 92 ℃（℉） | |
| ASTM D648/ISO 75 | 95 ℃（℉） | ||
| melting temperature | 125 ℃（℉） |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top