PC 4702-10 STYRON US

Form：Granules | Grade：Injection grade

Properties:

heat-resistingFlame retardant Excellent demolding perfrigidityGood dimensional stabilit

Typical Applications:

Fitness equipmentElectronic fieldElectrical fieldSuitable for producing electric toolsElectrical and information technology products.

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Fitness equipment \| Electronic field \| Electrical field \| Suitable for producing electric tools \| Electrical and information technology products.
Properties:	heat-resisting \| Flame retardant \| Excellent demolding perf \| rigidity \| Good dimensional stabilit

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D-792	1370	kg/m²
melt mass-flow rate	300℃，1.2kg	ASTM D-1238	15	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23℃	ASTM D-256	75	J/m
elongation	Break	ASTM D-638	4	%
tensile strength	Break	ASTM D-638	80	Mpa
Suspended wall beam without notch impact strength	23℃	ASTM D-256	380	J/m
Tensile modulus		ASTM D-638	6000	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.82MPa,Annealed	ASTM D-648	146	°C
Hot deformation temperature	Hot deformation temperature	1.82MPa,Unannealed	ASTM D-648	135	°C
Ball indentation temperature		IEC 598-1	＞125	°C
Vicat softening temperature	50N，50℃/hr	ASTM D-1525	＞125	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	3.2mm		V-0
Glow wire combustion index (GWFI)		IEC 695-2-1	960	°C
UL flame retardant rating	1.6mm		V-0
Shrinkage rate		ASTM D-955	0.002-0.004	mm/mm
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the Leakage Traceability Index (CTI)	2.0mm	IEC 112	175	V

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top