ABS LUBEMIX 45 BLACK
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183/A | 1.08to1.12 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 15to20 g/10min |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179/1eU | 无断裂 | |
| Impact strength of cantilever beam gap | ASTM D256A | 350to400 J/m | |
| ASTM D256 | 无断裂 | ||
| ASTM D256 | 35to40 kJ/m² | ||
| ISO 180/A | 30to35 kJ/m² | ||
| Suspended wall beam without notch impact strength | ISO 180 | 无断裂 | |
| Charpy Notched Impact Strength | ISO 179/1eA | 30to35 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strain | Break | ISO 527-2/1A/50 | 35to45 % |
| Flexural modulus | ISO 178 | 1500to2000 MPa | |
| bending strength | ISO 178 | 45.0to55.0 MPa | |
| Tensile modulus | ISO 527-2/1A/1 | 1800to2300 MPa | |
| tensile strength | Yield | ISO 527-2/1A/50 | 40.0to45.0 MPa |
| Break | ISO 527-2/1A/50 | 35.0to40.0 MPa | |
| Tensile strain | Yield | ISO 527-2/1A/50 | 5.0-6.0 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 100to110 °C | |
| ISO 75-2/B | 105to115 °C | ||
| ASTM D648 | 95.0to105 °C | ||
| vicat | ISO 306/A120 | 110to120 °C | |
| ISO 306/B120 | 100to110 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top