
PC GNB2520 IDEMITSU JAPAN
66
Form:Granules | Grade:Flame retardant grade
Properties:
enhanceFlame retardant
Typical Applications:
Automotive sectorElectronic fieldElectrical field
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Automotive sector | Electronic field | Electrical field |
| Properties: | enhance | Flame retardant |
Certificates
No Data...
Technical Data Sheet
| other | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| characteristic | 阻燃级 | |||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 13 | kg·cm/cm(J/M)ft·lb/in | |
| Elongation at Break | ASTM D638/ISO 527 | 4 | % | |
| tensile strength | ASTM D638/ISO 527 | 100 | kg/cm²(MPa)[Lb/in²] | |
| Rockwell hardness | ASTM D785 | M91 | ||
| Bending modulus | ASTM D790/ISO 178 | 5700 | kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 140 | kg/cm²(MPa)[Lb/in²] | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Combustibility (rate) | UL 94 | V-0 | ||
| Vicat softening temperature | ASTM D1525/ISO R306 | 150 | ℃(℉) | |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 2.5 | mm/mm.℃ | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792/ISO 1183 | 1.33 | ||
| Water absorption rate | ASTM D570/ISO 62 | 0.13 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | ASTM D257/IEC 60093 | <1016 | Ω.cm | |
| Dielectric loss | ASTM D150/IEC 60250 | 9.2×10-3 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.