PLA F 2201 CL
0
- Usages:film
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ISO 1133 | 8.0to10 g/10min | |
| Melt volume flow rate | ISO 1133 | 7.00to9.50 cm³/10min | |
| density | ISO 1183 | 1.25 g/cm³ |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179/1eU | 无断裂 | |
| Charpy Notched Impact Strength | ISO 179/1eA | 12 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 1150 MPa | |
| tensile strength | Yield | ISO 527-2 | 27.0 MPa |
| Flexural modulus | ISO 178 | 1050 MPa | |
| bending strength | ISO 178 | 28.0 MPa | |
| Tensile strain change rate | ISO 527 | >400 % | |
| Fracture bending strain | ISO 178 | NoBreak |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | ISO 3146 | 145to160 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top