
PBT 301-G0 North Chemical Institute
Properties:
Universal type good folding resistance
Product Description
Certificates(0)
Datasheet
Product Description
| Properties: | Universal type | good folding resistance |
Certificates
No Data...
Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| density | ASTM D-792 | 1.48 | g/cm3 | |
| Water absorption rate | 23℃,24hr | ASTM D-750 | 0.10 | % |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | ASTM D-638 | 50 | MPa | |
| Impact strength of simply supported beam without notch | ISO 179 | 40 | KJ/m2 | |
| Impact strength of cantilever beam gap | 3.22mm宽 | ASTM D-256 | 30 | J/M |
| Charpy Notched Impact Strength | ISO 179 | 4 | KJ/m2 | |
| bending strength | ASTM D-790 | 85 | MPa | |
| Bending modulus | ASTM D-790 | 2.2×103 | MPa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.82MPa | ASTM D-648 | 55 | ℃ |
| Combustibility | 3.2mm厚 | UL 94 | V-0 | |
| Linear coefficient of thermal expansion | -30+30℃ | ASTM D-696 | 8.0×10-5 | 1/℃ |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | ASTM D-955 | 1.4-2.0 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric loss | 106Hz,Tangent | ASTM D-150 | 2.0×10-2 | |
| Dielectric constant | 106Hz | ASTM D-150 | 3.0 | |
| Dielectric strength | 2mm厚 | ASTM D-149 | 19 | MV/m |
| Volume resistivity | ASTM D-257 | 1014 | Ω.m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.