PP 3210G6ANC3 HUIZHOU NPC

Form：Granules | Grade：Injection grade

Properties:

High rigidityGlass fiber reinforcedhigh strengthheat-resistingLow shrinkage30% glass fiber reinforceHigh rigidityLow shrinkageHigh mechanical strengthHeat resistance

Typical Applications:

Household appliancessmall home appliancesShellBobbinPump casingController housingHome appliance products etc

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Household appliances \| small home appliances \| Shell \| Bobbin \| Pump casing \| Controller housing \| Home appliance products \| etc
Properties:	High rigidity \| Glass fiber reinforced \| high strength \| heat-resisting \| Low shrinkage \| 30% glass fiber reinforce \| High rigidity \| Low shrinkage \| High mechanical strength \| Heat resistance

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D-1238	3.0	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ASTM D-256	9	kg.cm/cm
Bending modulus		ASTM D-790	45000	kg/cm2
tensile strength	Yield	ASTM D-638	870	kg/cm2
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT	ASTM D-648	160	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		ASTM	0.3-0.7	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength		ASTM D-149	40	KV/mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top