Share
Add to Compare

TPV 4370 BK DSM HOLAND

26

Form:Granules | Grade:Injection grade

Properties:
Low compression permanentGood chemical resistanceHigh heat resistanceFlame retardant performan
Product Description
Certificates(0)
Datasheet

Product Description

Properties:Low compression permanent | Good chemical resistance | High heat resistance | Flame retardant performan

Certificates

No Data...

Technical Data Sheet

mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
Permanent compression deformation25℃ASTM D-39540%
tear strengthASTM D-62421.9kN/m
elongationBreakASTM D-412500%
tensile strengthYieldASTM D-4126.55Mpa
tensile strength100StrainASTM D-4122.62Mpa
Shore hardnessShoreA,5Sec,InjectionASTM D-224072
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Extreme Oxygen IndexASTM D-286330%
UL flame retardant rating1.19mmUL 94V-0
Brittle temperatureASTM D-746-55.0°C
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
Dissipation factor1MHzASTM D-1500.0064
Dielectric constant1MHzASTM D-1502.50
Dielectric strength25.4mm,In AirASTM D-14928KV/mm
agingTest ConditionTest MethodTest ResultTest Unit
Volume change125℃,24hr,在IRM 903油中ASTM D-471200%
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.