ETPU ISOPLAST™ 202 LGF40 ETPU
0
- Properties:Fillerlong glass fiber40%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.50 g/cm³ | |
| Shrinkage rate | ASTM D955 | 0.10to0.30 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 12000 MPa | |
| tensile strength | Yield | ASTM D638 | 186 MPa |
| Break | ASTM D638 | 186 MPa | |
| elongation | Yield | ASTM D638 | 1.8 % |
| Break | ASTM D638 | 1.8 % | |
| Flexural modulus | ASTM D790 | 10000 MPa | |
| bending strength | ASTM D790 | 338 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 270 J/m | |
| Dart impact | ASTM D3763 | 14.0 J | |
| ASTM D3763 | 17.0 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 166 °C | |
| ASTM D648 | 144 °C | ||
| Glass Transition Temperature | ASTM D3418 | 138 °C | |
| Linear coefficient of thermal expansion | ASTM D696 | 7E-06 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top