PAI Torlon® 5030
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.61 g/cm³ | |
| Shrinkage rate | ASTM D955 | 0.10to0.25 % | |
| Water absorption rate | ASTM D570 | 0.24 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ASTM D790 | 9860 MPa | |
| bending strength | ASTM D790 | 333 MPa | |
| ASTM D790 | 181 MPa | ||
| Compression Modulus | ASTM D695 | 7930 MPa | |
| compressive strength | ASTM D695 | 264 MPa | |
| Tensile modulus | ASTM D638 | 14500 MPa | |
| tensile strength | ASTM D638 | 221 MPa | |
| ASTM D1708 | 205 MPa | ||
| elongation | Break | ASTM D638 | 2.3 % |
| ASTM D1708 | 7.0 % | ||
| Flexural modulus | ASTM D790 | 11700 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 80 J/m | |
| Suspended wall beam without notch impact strength | ASTM D4812 | 530 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 1E+18 ohms | |
| Volume resistivity | ASTM D257 | 2E+17 ohms·cm | |
| dielectric strength | ASTM D149 | 33 kV/mm | |
| dielectric constant | ASTM D150 | 4.40 | |
| ASTM D150 | 4.20 | ||
| Dissipation Factor | ASTM D150 | 0.022 | |
| ASTM D150 | 0.050 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 282 °C | |
| thermal conductivity | ASTMC177 | 0.36 W/m/K | |
| Linear coefficient of thermal expansion | ASTM D696 | 1.6E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top