Epoxy Lytex 4181
0
- Properties:Fillercarbon fiber reinforced material55%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.45 g/cm³ | |
| Shrinkage rate | ASTMD955 | 0.0 % |
| thermosetting | Test Condition | Test Method | Test Result |
|---|---|---|---|
| shelf-life | 26 wk | ||
| Post curing time | 0.083到0.17 hr |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTMD638 | 207 MPa | |
| Flexural modulus | ASTMD790 | 31000 MPa | |
| bending strength | ASTMD790 | 414 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 800 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 260 °C | ||
| thermal conductivity | ASTMC177 | 0.45 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top