Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.48 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | R-Scale | ASTM D785 | 109 |
| Hardness (Shore) | | ASTM D2240 | 83 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| NBSSmokeDensity | | ASTME662 | 206 Ds |
| UL flame retardant rating | | UL 94 | V-0 |
| NBSSmokeDensity | | ASTME662 | 32.0 Ds |
| NBSSmokeDensity | | ASTME662 | 124 Ds |
| NBSSmokeDensity | | ASTME662 | 37.0 Ds |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 64 J/m |
| Dart impact | | ASTM D4226 | 80.1 J/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D638 | 2650 MPa |
| tensile strength | Yield | ASTM D638 | 40.8 MPa |
| Flexural modulus | | ASTM D790 | 2820 MPa |
| bending strength | | ASTM D790 | 73.1 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Hot deformation temperature (HDT) | | ASTM D648 | 66.7 °C |
| Hot deformation temperature (HDT) | | ASTM D648 | 59.4 °C |
| | ASTM D696 | 1.1E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare