PP Homopolymer ASI POLYPROPYLENE 1188-01
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 0.898 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 5.0 g/10min |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dart impact | 17.0 J | ||
| Impact strength of cantilever beam gap | ASTM D256 | 530 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ASTM D638 | 20.7 MPa |
| elongation | Break | ASTM D638 | >50 % |
| Flexural modulus | ASTM D790 | 850 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature (HDT) | ASTM D648 | 80.0 °C | |
| ASTM D648 | 50.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top