PP HP30G SAUDI ARAMCO

Form：Granules | Grade：Injection grade

Properties:

Good mechanical performanGood processing performan

Typical Applications:

Binding tapeWoven fabricMonofilamentlineWoven bagThermoforming Applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Binding tape \| Woven fabric \| Monofilament \| line \| Woven bag \| Thermoforming Applications
Properties:	Good mechanical performan \| Good processing performan

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength		ISO 178	85.0	Mpa
Bending modulus		ISO 178	4500	Mpa
Tensile strain	Break	ISO 527-2	7.0	%
tensile strength	Break	ISO 527-2	57.0	Mpa
injection	Test Condition	Test Method	Test Result	Test Unit
Mold temperature			27 to 60	°C
Processing (melt) temperature			204 to 249	°C
Spray nozzle temperature			210 to 238	°C
Temperature at the front of the material cylinder			204 to 243	°C
Temperature in the middle of the barrel			210 to 238	°C
Temperature at the rear of the barrel			210 to 238	°C
drying temperature			71 to 82	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
ash content		ISO 3451-1	30	%
Shrinkage rate	Flow	ISO 294-4	0.20 - 0.50	%
melt mass-flow rate	230°C/2.16 kg	ISO 1133	4.5	g/10 min

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top