EVA 3019PE BRASKEM BRAZIL

Form：Granules | Grade：Injection grade

Properties:

Fatigue resistanceHigh elasticityResistance to stress cracHigh softness and softnesCrosslinkableEasy to form

Typical Applications:

ToyTackifierfilmFootwear

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Toy \| Tackifier \| film \| Footwear
Properties:	Fatigue resistance \| High elasticity \| Resistance to stress crac \| High softness and softnes \| Crosslinkable \| Easy to form

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	3.2 mm，23℃	ASTM D256	3
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	Shore D，Compression Molded	ASTM D2240	30
Shore hardness	Shore hardness	Shore A，Compression Molded	ASTM D2240	90
Bending modulus		ASTM D790	26000	kg/cm2
Yield (yld)	Yield	ASTM D638	260	kg/cm2
thermal properties	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8 Mpa	ASTM D648	125	°C
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		ASTM D3418	86	°C
Vicat softening temperature		ASTM D1525 2	60	°C
combustion performance	Test Condition	Test Method	Test Result	Test Unit
v		UL 94	0	mm
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D1238	10 g/10	g/10min
Shrinkage rate	3 mm	ASTM D 955	0.7-1.3	%
Vinyl acetate content			19	wt%
Environmental stress cracking resistance	50 ℃，2.00 mm，100%非离子表面活性剂，Compression Molded，F50	ASTM D1693	> 300	hr
melt mass-flow rate	190℃，2.16kg190℃/2.16 kg	ASTM D1238	2.5	g/10min
density		ASTM D792	0.94	g/cm³
Electrical Property	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength	3.2 mm	ASTM D149	40	KV/mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top