PPS RYTON® R-10-7006A
51
- Properties:Easy to process
- Usages:Electrical applications
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | 东丽法 | 0.15 % | |
| 东丽法 | 0.55 % | ||
| 东丽法 | 70 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ASTM D-570 | 0.02 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ASTM D-790 | 165 Mpa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 80 J/m | |
| ASTM D-256 | 30 KJ/m | ||
| Shore hardness | ASTM D-785 | 123 洛氏 | |
| bending strength | ASTM D-790 | 16.5 GPa | |
| tensile strength | ASTM D-638 | 1.0 % | |
| elongation at break | ASTM D-732 | 60 | |
| abrasion | ASTM D-1044 | 70 mg/1000回 | |
| tensile strength | ASTM D-638 | 120 Mpa | |
| limiting pv value | 东丽法 | 800 KJ/m | |
| coefficient of friction | ASTM D-1894 | 0.30 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric constant | ASTM D-150 | 4.9 | |
| dielectric strength | ASTM D-149 | 16 MV/m | |
| Inherent resistance of volume | ASTM D-257 | 10 Ω.m | |
| arc resistance | ASTM D-495 | 128 秒 | |
| Induced positive connection | ASTM D-150 | 0.002 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | DSC | 278 °C | |
| Heat distortion temperature | ASTM D-648 | >260 °C | |
| Linear coefficient of thermal expansion | ASTM D-696 | 1.6 | |
| ASTM D-696 | 2.3 | ||
| combustibility | UL -94 | V-0 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top