PES 3300
0
- Properties:Has flame retardancyhigh temperature resistancegood dimensional stabilityetc
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.37 g/cm | |
| Water absorption rate | ASTM D570 | 0.56 % | |
| melt mass-flow rate | ASTM D1238 | 16-25 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ASTM D790 | 114 MPa | |
| Flexural modulus | ASTM D790 | 2470 MPa | |
| tensile strength | ASTM D638 | 88.9 MPa | |
| Tensile modulus | ASTM D638 | 2470 MPa | |
| elongation at break | ASTM D638 | 25-75 % | |
| Impact strength of cantilever beam gap | ASTM D256 | 53.4 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTM D3638 | 150 V | ||
| Limiting Oxygen Index | ASTM D2863 | 40 % | |
| dielectric constant | ASTM D150 | 3.20 | |
| Dissipation Factor | ASTM D150 | 0.0040 | |
| arc resistance | ASTM D495 | 50 sec | |
| Surface Resistivity | ASTM D257 | 10 ohms | |
| Volume resistivity | ASTM D257 | 10 ohm-cm | |
| dielectric strength | ASTM D149 | 16 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Glass Transition Temperature | 223 ℃ | ||
| Hot deformation temperature (HDT) | ASTM D648 | 195 ℃ | |
| Coefficient of expansion | ASTM D696 | 0.00058 cm/cm/℃ | |
| Maximum continuous operating temperature | ASTM D794 | 180 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top