TPO PRE-ELEC® PP 1350

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTMD792	1.02 g/cm³
density	density		ISO1183	1.02 g/cm³
melt mass-flow rate		ASTMD1238	3.5 g/10min
	melt mass-flow rate		ASTMD1238	21 g/10min
		melt mass-flow rate		ISO1133	3.5 g/10min
		melt mass-flow rate	melt mass-flow rate		ISO1133	21 g/10min
Shrinkage rate		ASTMD955	1.2to1.8 %
Shrinkage rate	Shrinkage rate		ISO294-4	1.2to1.8 %

Test Condition	Test Method	Test Result
Shore A	ASTMD2240	96
		ASTMD2240	71
		Shore A	ISO868	96
				ISO868	71

Mechanical properties	Test Condition	Test Method	Test Result
elongation	Break	ASTMD638	30 %
Tensile strain		ISO527-2	30 %
Flexural modulus		ASTMD790	1300 MPa
Flexural modulus	Flexural modulus		ISO178	1300 MPa
tensile strength		ASTMD638	17.9 MPa
tensile strength	tensile strength	Yield	ASTMD638	26.2 MPa
Tensile stress	Yield	ISO527-2	26.0 MPa
tensile strength		ISO527-2	18.0 MPa
elongation	Yield	ASTMD638	10 %
Tensile strain	Yield	ISO527-2	10 %

Impact resistance	Test Condition	Test Method	Test Result
CharpyNotchedImpactStrength		ASTMD256	13 kJ/m²
	CharpyNotchedImpactStrength		ISO179	13 kJ/m²
		CharpyNotchedImpactStrength		ISO179	33 kJ/m²
		CharpyNotchedImpactStrength	CharpyNotchedImpactStrength		ASTMD256	34 kJ/m²
Impact strength of simply supported beam without notch		ASTMD256	NoBreak
	Impact strength of simply supported beam without notch		ISO179	NoBreak
		Impact strength of simply supported beam without notch		ISO179	NoBreak
		Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ASTMD256	NoBreak
NotchedIzodImpact(Area)		ASTMD256	6.30 kJ/m²
NotchedIzodImpact(Area)	NotchedIzodImpact(Area)		ASTMD256	NoBreak
Impact strength of cantilever beam gap		ISO180	8.0 kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO180	NoBreak
Suspended wall beam without notch impact strength		ASTMD256	NoBreak
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength		ASTMD256	NoBreak
		ISO180	NoBreak
			ISO180	NoBreak

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		ESDSTM11.11	<1.0E+4 ohms
Surface Resistivity	Surface Resistivity		IEC61340-2-3	<1.0E+4 ohms
Volume resistivity		内部方法	<1.0E+3 ohms·cm

Thermal performance	Test Condition	Test Method	Test Result
		ASTMD648A	52.2 °C
			ISO75-2/Af	52.0 °C
vicat		ASTMD15253	149 °C
vicat	vicat		ISO306/A50	150 °C
		ASTMD648B	80.0 °C
			ISO75-2/Bf	80.0 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top