PA6 LUVOCOM® 3-8363
0
- Usages:Textile applicationsautomotive applicationsengineering accessories
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 1.69 g/cm³ | |
| Shrinkage rate | DIN16901 | 1.3到1.8 % | |
| Water absorption rate | <1.0 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ISO178 | 3900 MPa | |
| Bending stress | ISO178 | 85.0 MPa | |
| Bending Strain | ISO178 | 3.0 % | |
| Tensile modulus | ISO527-2 | 4400 MPa | |
| Tensile stress | Break | ISO527-2 | 60.0 MPa |
| Tensile strain | Yield | ISO527-2 | 2.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO179/1eA | 3.0 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO179/1fU | 20 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC60093 | >1.0E+10 ohms | |
| insulation resistance | IEC60167 | >1.0E+10 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Continuous use temperature | UL746B | 80.0 °C | |
| Maximum operating temperature - SharrTerm | 120 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top