Technical Data Sheet
| Cured Properties | Test Condition | Test Method | Test Result |
|---|
| Supporting hardness | | ASTMD2240 | 65到75 |
| tensile strength | | ASTMD638 | 18.6 MPa |
| elongation | Break | ASTMD638 | 350 % |
| tear strength | | ASTMD624 | 35.0 kN/m |
| Uncured Properties | Test Condition | Test Method | Test Result |
|---|
| | | 0.73 Pa·s |
| | | 1.8E+02 hr |
| | | 9.5到15 min |
| | | 0.70 Pa·s |
| | | 0.72 Pa·s |
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | Base Resin | | 1.20 g/cm³ |
| Shrinkage rate | | ASTMD2566 | 1.0到1.5 % |
| density | | | 1.14 g/cm³ |
| density | | | 1.15 g/cm³ |
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| Resin | | 按重量计算的混合比:48按容量计算的混合比:46 |
| Hardener | | 按重量计算的混合比:100按容量计算的混合比:100 |
| | | 60到180 min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| | ASTMD4060 | 4.00 mg |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tear strength | Split | ASTMD470 | 9.6 kN/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare