ASA+PC ASA/PC 330 S2
0
- Properties:Impact performance
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179/1eU | 无断裂 | |
| ISO 179/1eU | 无断裂 | ||
| Heat distortion temperature | ISO 75-2/A | 105 °C | |
| vicat | ISO 306/B50 | 130 °C | |
| Surface Resistivity | IEC 60093 | 1E+11 ohms | |
| UL flame retardant rating | UL 94 | HB | |
| Water absorption rate | ISO 62 | 0.25 % | |
| Tensile modulus | ISO 527-2/1 | 2100 MPa | |
| tensile strength | ISO 527-2/50 | 60.0 MPa | |
| Tensile strain | ISO 527-2/50 | 5.0 % | |
| bending strength | ISO 178 | 90.0 MPa | |
| Charpy Notched Impact Strength | ISO 179/1eA | 15 kJ/m² | |
| ISO 179/1eA | 25 kJ/m² | ||
| UL flame retardant rating | UL 94 | HB | |
| density | ISO 1183 | 1.07 g/cm³ | |
| Melt volume flow rate | ISO 1133 | 35.0 cm³/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top