Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.19 g/cm³ |
| Apparent density | | ASTM D1895 | 0.66 g/cm³ |
| melt mass-flow rate | | ASTM D1238 | 7.0 g/10min |
| Shrinkage rate | | ASTM D955 | 0.40to0.60 % |
| Water absorption rate | Equilibrium | ASTM D570 | <0.30 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | M-Scale | ASTM D785 | 94 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| Yellowness Index | | ASTM D1925 | <1.0 YI |
| transmissivity | | ASTM D1003 | 92.0 % |
| Haze ratio | | ASTM D1003 | <1.0 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D638 | 3240 MPa |
| tensile strength | | ASTM D638 | 65.5 MPa |
| elongation | Yield | ASTM D638 | 4.0to6.0 % |
| elongation | Break | ASTM D638 | 4.0to6.0 % |
| Flexural modulus | | ASTM D790 | 3380 MPa |
| bending strength | | ASTM D790 | 117 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 19 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 93.9 °C |
| vicat | | ASTM D1525 | 105 °C |
| Linear coefficient of thermal expansion | | ASTM D696 | 7.2E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare