PP EP332K LYONDELLBASELL SAUDI

Form：Granules | Grade：Injection grade

Properties:

heat-resistingLow temperature impact reHigh toughnessHigh rigidityGood resistance to heat aGood impact resistanceGood resilienceHigh stiffnessGood resistance to heat a

Typical Applications:

Automotive sectorchipHousehold goodssporting goodsToyAutomotive Applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive sector \| chip \| Household goods \| sporting goods \| Toy \| Automotive Applications
Properties:	heat-resisting \| Low temperature impact re \| High toughness \| High rigidity \| Good resistance to heat a \| Good impact resistance \| Good resilience \| High stiffness \| Good resistance to heat a

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	230°C/2.16 kg	ASTM D1238	5	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ASTM D638	24.5	Mpa
Elongation at Break	Yield	ASTM D638	9	%
Bending modulus		ASTM D790	1130	Mpa
Impact strength of cantilever beam gap	23℃	ASTM D256	147
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45Mpa, Unannealed	ASTM D648	88	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	0.9

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top