Unspecified VisiJet® M3 Techplast
0
- Usages:Forming materialsmold manufacturingtemplates
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D4164 | 1.02 g/cm³ | |
| ash content | 0.010 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 866 MPa | |
| tensile strength | ASTM D638 | 22.1 MPa | |
| elongation | Break | ASTM D638 | 6.1 % |
| bending strength | ASTM D790 | 28.1 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 46.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top