Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 0.934 g/cm³ |
| Apparent density | | ASTM D1895 | 0.34 g/cm³ |
| melt mass-flow rate | | ASTM D1238 | 5.0 g/10min |
| Environmental stress cracking resistance | | ASTM D1693B | 1000 hr |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| UL flame retardant rating | | UL 94 | HB |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Pourability | | ASTM D1895 | 30.0 sec |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 19.3 MPa |
| Tensile strain | | ASTM D638 | 400 % |
| Flexural modulus | | ASTM D790 | 793 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ARM | 92 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 63.0 °C |
| Heat distortion temperature | | ASTM D648 | 42.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare