PA/ABS Terblend®N N NM-12 BASF USA
201
- Properties:ProcessabilitymedialHigh rigidity
- Usages:Phone caseHousehold goodsPhone caseHousehold goods
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Melt Volume-Flow Rate (MVR) | 240°C/10.0kg | ISO1133 | 34.0 | cm3/10min |
| Shrinkage rate | ISO294-4 | 0.80 | % | |
| Water absorption rate | 平衡,23°C,50%RH | ISO62 | 1.1 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Ball pressure hardness | ISO2039-1 | 102 | Mpa | |
| Tensile modulus | ISO527-2 | 2200 | Mpa | |
| tensile strength | 屈服,23°C | ISO527-2 | 50.0 | Mpa |
| elongation | 屈服,23°C | ISO527-2 | 3.2 | % |
| Bending modulus | ISO178 | 2200 | Mpa | |
| bending strength | ISO178 | 74.0 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| 0.45MPa, annealed | ISO75-2/B | 88.0 | °C | |
| 1.8MPa, annealed | ISO75-2/A | 66.0 | °C | |
| -- | ISO306/A50 | 170 | °C | |
| ISO306/B50 | 105 | °C | ||
| Linear coefficient of thermal expansion | MD | ISO11359-2 | 9E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Surface resistivity | IEC60093 | 1E+14 | ohms | |
| Volume resistivity | IEC60093 | >1.0E+15 | ohms·cm | |
| Relative permittivity | 1MHz | IEC60250 | 2.90 | |
| Dissipation factor | 1MHz | IEC60250 | 0.015 |
| film | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Elongation MD | 断裂 | 20 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top