Epoxy EPO-TEK® 310T-M Epoxy Technology Inc.

Typical Applications:

Electrical and electronic applications optical applications medical and nursing supplies

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:

Electrical and electronic applications | optical applications | medical and nursing supplies

Certificates

No Data...

Technical Data Sheet

Cured Properties	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreA		75
LapShearStrength	23°C		3.45	MPa
Relative permittivity	1kHz		5.10
Volume resistivity	23°C		>2.5E+10	ohms·cm
Dissipation factor	1kHz		0.091
Uncured Properties	Test Condition	Test Method	Test Result	Test Unit
density	Pot Life		35	min
Color	--5		Clear/Transparent
Color	Color	--6		Tan
density	PartB		1.08	g/cm³
	density	PartA		1.12	g/cm³
		density	粘度7(23°C)		1.8to3.3	Pa·s
		density	density	固化时间(65°C)		2.0	hr
thermosetting	Test Condition	Test Method	Test Result	Test Unit
Thermosetting components	PartA		按重量计算的混合比:10
	Thermosetting components	PartB		按重量计算的混合比:6.0
	Thermosetting components	Thermosetting components	Shelf Life(23°C)		52	wk
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Glass transition temperature			<30.0	°C
Linear coefficient of thermal expansion	MD：--3		7.4E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：--4		2.4E-04	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Particle size distribution			<20.0	µm
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
weight loss on heating	250°C		0.18	%
operate temperature	Intermittent		-55-300	°C
	operate temperature	StorageModulus(23°C)		8.43	MPa
	operate temperature	operate temperature	ThixotropicIndex		2.10
weight loss on heating	200°C		0.050	%
weight loss on heating	weight loss on heating	300°C		0.63	%
DegradationTemperature			401	°C
Shear Strength	23°C		7.03	MPa
operate temperature	Continuous		-55-200	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top