HDPE SNOLEN® IM 8/51 JSC Gazprom neftekhim Salavat
0
- Usages:cover
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 0.947to0.951 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 6.0to8.0 g/10min | |
| Environmental stress cracking resistance | ISO 16770 | 12.0 hr | |
| Melt flow ratio | 15.5to21.5 | ||
| melt mass-flow rate | ISO 1133 | 110to130 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ISO 868 | 62 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strain | Yield | ISO 527-2 | 10 % |
| Break | ISO 527-2/50 | >1000 % | |
| Tensile modulus | 1050 MPa | ||
| tensile strength | Yield | ISO 527-2/50 | 24.0 MPa |
| Break | ISO 527-2/50 | 30.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179 | >4.0 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| brittle temperature | ASTM D746 | <-80.0 °C | |
| vicat | ISO 306/B50 | 70.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top