HDPE Braskem PE GM 7746 C
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 0.944 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 4.5 g/10min | |
| Environmental stress cracking resistance | ASTM D1693 | >1000 hr |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D2240 | 62 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 23.0 MPa | |
| ASTM D638 | 42.0 MPa | ||
| elongation | ASTM D638 | 13 % | |
| ASTM D638 | 880 % | ||
| Flexural modulus | Compression Molded | ASTM D790 | 890 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | Compression Molded | ASTM D256 | 760 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 70.0 °C | |
| vicat | ASTM D15251 | 126 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top