PC TRIREX® 3025PJ SAMYANG KOREA
6
- Properties:Dimensional stabilityLow moisture absorptionElectrical performanceHigh mobilityLow temperature impact reWeather resistanceMedium viscosity
- Usages:Electrical appliancesOptical applicationsMixtureAutomotive sectorElectronic fieldElectrical field
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | 1.59mm | UL 94 | V-2 |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | Break | ASTM D638 | 150 % |
| Bending modulus | ASTM D790 | 2250 Mpa | |
| bending strength | Yield | ASTM D790 | 92.0 Mpa |
| tensile strength | Yield | ASTM D638 | 72.0 Mpa |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 134 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 5.0E-5到7.0E-5 cm/cm/°C |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 9.0 g/10min |
| Shrinkage rate | MD:3.00mm | ASTM D955 | 0.50-0.70 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.15 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 4E+16 ohms·cm | |
| Dielectric strength | ASTM D149 | 30 KV/mm | |
| Arc resistance | ASTM D495 | 120 sec |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.