Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.31 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 93 |
| Shore hardness | | ASTM D2240 | 41 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Limiting Oxygen Index | | ASTM D2863 | 28 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ASTM D790 | 359 MPa |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| elongation | | ASTM D412 | 600 % |
| tensile strength | | ASTM D412 | 19.0 MPa |
| aging | Test Condition | Test Method | Test Result |
|---|
| Change rate of tensile strength in air | | UL 1581 | >90 % |
| Elongation retention rate | | UL 1581 | >90 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D257 | 1.6E+16 ohms·cm |
| dielectric strength | | ASTM D149 | 26 kV/mm |
| dielectric constant | | ASTM D150 | 2.40 |
| Dissipation Factor | | ASTM D150 | 2.7E-03 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| brittle temperature | | ASTM D746 | <-45.6 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare