PA12 LV-5H 9288 EMS-CHEMIE SWITZERLAND

Form：Granules | Grade：Flame retardant enhanced grade

Properties:

Low temperature impact regas barrier

Typical Applications:

Electrical applicationschipShellsporting goodsPneumatic applicationsIndustrial applicationsEngineering accessoriesApplication in the automotive fieldPower/Other ToolsHousehold goodsLaptop caseHydraulic applicationsHome appliance componentsMedical devicesConsumer product application field

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical applications \| chip \| Shell \| sporting goods \| Pneumatic applications \| Industrial applications \| Engineering accessories \| Application in the automotive field \| Power/Other Tools \| Household goods \| Laptop case \| Hydraulic applications \| Home appliance components \| Medical devices \| Consumer product application field
Properties:	Low temperature impact re \| gas barrier

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-30°C	kJ/m²	90
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	kJ/m²	90
flammability	Test Condition	Test Method	Test Result	Test Unit
Flammability level	0.8mm		HB	--
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		MPa	12000	11500
tensile strength	Break		155	MPa
Tensile strain	Break	%	5.0	6.0
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	MD	cm/cm/°C	1.5E-05	--
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD	cm/cm/°C	1.2E-04	--
Hot deformation temperature	1.8MPa,Unannealed	°C	165	--
Hot deformation temperature	Hot deformation temperature	8.0MPa,Unannealed	°C	125	--
Continuous use temperature	--3	°C	90.0to120	--
Continuous use temperature	Continuous use temperature	--4	°C	150	--
Melting temperature		°C	178	--
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	TD	%	0.50	--
Shrinkage rate	Shrinkage rate	MD	%	0.10	--
Water absorption rate	Saturation,23°C	%	0.80	--
Water absorption rate	Water absorption rate	Equilibrium,23°C,50%RH	%	0.40	--
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ohms	--	1E+12
Volume resistivity		ohms·cm	--	1E+13
Dielectric strength		kV/mm	--
Compared to the anti leakage trace index		V		--
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD,15Sec		82	--
Ball Pressure Test		MPa	155	--

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top