
Product Description
Certificates(1)
Datasheet
Alternative(4)
Product Description
Certificates
TDS
Technical Data Sheet
| other | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| purpose | 工程塑料.可直接注塑 | |||
| Color | 本色 | |||
| characteristic | 可直接注塑 | |||
| machinability | Test Condition | Test Method | Test Result | Test Unit |
| pressure | 100-150 | Mpa | ||
| Processing temperature | 230-250 | °C | ||
| pressure | 0.3-0.5 | Mpa | ||
| 10-30 | Mpa | |||
| Processing temperature | 240-260 | °C | ||
| 250-280 | °C | |||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | ASTM D790/ISO 178 | 88 | kg/cm²(MPa)[Lb/in²] | |
| Bending modulus | ASTM D790/ISO 178 | 2500 | kg/cm²(MPa)[Lb/in²] | |
| Rockwell hardness | ASTM D785 | 67.5 | ||
| tensile strength | ASTM D638/ISO 527 | 76 | kg/cm²(MPa)[Lb/in²] | |
| Elongation at Break | ASTM D638/ISO 527 | 752 | % | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Melting temperature | 210-215 | ℃(℉) | ||
| Hot deformation temperature | HDT | ASTM D648/ISO 75 | 75 | ℃(℉) |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | ASTM D570/ISO 62 | <0.06 | % | |
| density | ASTM D792/ISO 1183 | 1.12-1.16 | ||
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | ASTM D257/IEC 60093 | 1.8×10^12 | Ω.cm | |
| Dielectric constant | ASTM D150/IEC 60250 | 1.8×10^12 | ||
| Surface resistivity | ASTM D257/IEC 60093 | 2.1×10^13 | Ω |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.