PP-R R200P HYOSUNG KOREA

Form：Granules | Grade：Pipe grade

Properties:

High temperature resistanHigh voltage resistanceChemical stability perforHeat resistancehigh strength

Typical Applications:

Building water supply systemFloor heating systemRadiator heatingChemical tubingAgricultural pipePipe fittings

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Building water supply system \| Floor heating system \| Radiator heating \| Chemical tubing \| Agricultural pipe \| Pipe fittings
Properties:	High temperature resistan \| High voltage resistance \| Chemical stability perfor \| Heat resistance \| high strength

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	190℃，5.0kg	ASTM D-1238	0.4	g/10min
melt mass-flow rate	melt mass-flow rate	230℃，2.16kg	ASTM D-1238	0.2	g/10min
density		ASTM D792	0.91	g/cm³
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Elongation at Break		ASTM D638/ISO 527	＞400	kg/cm²(MPa)[Lb/in²]
Bending modulus		ASTM D790/ISO 178	9000	%
Rockwell hardness		ASTM D785	75
tensile strength		ASTM D638/ISO 527	270	kg/cm²(MPa)[Lb/in²]
Impact strength of cantilever beam gap	0℃	ASTM D-256	8	kg·cm/cm
Volume resistivity		HS Method	＞1013	Ω
tensile strength	降伏点	ASTM D-638	270	kg/cm2
elongation		ASTM D-638	＞400	%
Impact strength of cantilever beam gap	-20℃	ASTM D-256	3	kg·cm/cm
Bending modulus		ASTM D-790	8.500	kg/cm2
Impact strength of cantilever beam gap	23℃	ASTM D-256	No break	kg·cm/cm
tensile strength	破断点	ASTM D-638	230	kg/cm2
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ASTM D1525/ISO R306	130	℃（℉）
Melting temperature			141	℃（℉）
Melting temperature	Melting temperature		HS Method	141	°C
Vicat softening temperature		ASTM D-1525	130	°C
Linear coefficient of thermal expansion	0-110℃	Dilatometer	1.5×10-4
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D1238/ISO 1133	0.25	g/10min
density		ASTM D792/ISO 1183	0.91

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top