PC HP2REU-1H9D036T SABIC INNOVATIVE NETHERLANDS

Form：Granules | Grade：Medical grade

Properties:

High mobility

Typical Applications:

medical caremedicineMedical/nursing suppliesmedical treatmentNursing suppliesmedicine

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	medical care \| medicine \| Medical/nursing supplies \| medical treatment \| Nursing supplies \| medicine
Properties:	High mobility

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
transmissivity	2540μm	ASTM D1003	88.0	%
turbidity	2540μm	ASTM D1003	<0.80	%
impact performance	Test Condition	Test Method	Test Result	Test Unit
-30°C		ISO 179/1eA	10	kJ/m²
23°C		ISO 179/1eA	65	kJ/m²
23°C	23°C		ISO 179/2C	35	kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂
-30°C		ASTM D256	30	J/m
23°C		ASTM D256	70	J/m
-30°C		ISO 180/1A	10	kJ/m²
23°C		ISO 180/1A	60	kJ/m²
Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	无断裂
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	23°C	ISO 180/1U	无断裂
Dart impact	23°C,TotalEnergy	ASTM D3763	633	J
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
crack		ASTM D638	700	Mpa
crack	crack		ISO 527-2/50	65.0	Mpa
yield		ASTM D638	7.0	%
yield	yield		ISO 527-2/50	6.0	%
crack		ASTM D638	130	%
crack	crack		ISO 527-2/50	100	%
50.0mm span		ASTM D790	2350	Mpa
--8		ISO 178	2300	Mpa
--9		ISO 178	90.0	Mpa
Yield, 50.0mm span		ASTM D790	980	Mpa
--2		ASTM D638	630	Mpa
yield		ASTM D638	630	Mpa
yield	yield		ISO 527-2/50	63.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
0.45MPa, unannealed, 100mm span		ISO 75-2/Be	133	°C
1.8MPa, unannealed, 3.20mm		ASTM D648	129	°C
1.8MPa, unannealed, 100mm span		ISO 75-2/Ae	122	°C
Flow: -40 to 40 ° C		ASTME831	6.8E-05	cm/cm/°C
Flow: 23 to 80 ° C	23to80℃	ISO 11359-2	7E-05	cm/cm/°C
Horizontal: -40 to 40 ° C	Across Flow, -40to40℃	ASTME831	6.8E-05	cm/cm/°C
Horizontal: -40 to 40 ° C	Horizontal: -40 to 40 ° C	Across Flow, -40to40℃	ISO 11359-2	7E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	300°C/1.2kg	ASTM D1238	22	g/10min
Melt Volume Flow Rate (MVR)	300°C/1.2kg	ISO 1133	21.0	cm3/10min
Shrinkage rate	MD：--1	Internal Method	0.50-0.70	%
Shrinkage rate	Shrinkage rate	MD：3.20mm	Internal Method	0.50-0.70	%
Water absorption rate	Saturation,23°C	ISO 62	0.35	%
Water absorption rate	Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.15	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top